AQUALINE TETRA SERIES SEAWATER REVERSE OSMOSIS SYSTEMS
100 m3/day to 1500 m3/day
Reverse Osmosis is the membrane filtration process applied to waters where classical purification systems are insufficient (seawater, well water with high conductivity, etc.), which separates all unwanted minerals from the water and aims to obtain pure water.
STANDARD FEATURES
Membrane cases FRP
TFC Spiral Wound Membranes 8" diameter
AISI304 or AISI316 Duplex quality stainless steel high pressure pump
St37 Epoxy painted Carbon Steel or AISI304 Stainless Steel chassis
Cartridge filtration with 5 micron precision
Low pressure line U-PVC PN16
High pressure line AISI316Ti or Duplex Stainless Steel
Introduction Butterfly valve with electric actuator
Low and High pressure switch
Clean and Waste water flow meters
Glycerin manometers
Product water conductivity indicator (0-2000µS/cm)
Inlet and Product water pH Meter (optional)
On-Off switch
Alarm and Status lights
380V/50Hz/3ph
IP56 control board
Recommended Inlet Water Limits
Inlet water TDS: 38,000 - 41,000 ppm
Working pressure: between 50 and 70 bar
Inlet water pressure: 2 to 5 bar
Inlet water pH range: 6 – 8
Silica (SiO2) Tolerance 25 ppm max. @60% efficiency
Max. Inlet water temperature = 30º C Max.
Max Iron (Fe) tolerance is 0.05 ppm, Antiscalant dosage if any is 0.2 ppm
There should be no Hydrogen Sulfide.
There should be no blurriness. (NTU)
